user_mobilelogo
Welcome, Guest
Username: Password: Remember me
This is a public forum thread open to all users
  • Page:
  • 1

TOPIC:

Distributor 4 weeks 13 hours ago #42011

Does anyone have an old distributor I could have. I only actually need the drive and base to keep the oil pump drive in place. My new engine runs off a crank sensor but my engine builder has lost my old distributor. Thanks

Please Log in or Create an account to join the conversation.

Distributor 3 weeks 5 days ago #42012

The Haynes book shows a spindle holding the shaft in place when the original car had the distributor on the cam shaft. i wonder if you can still get them or have one made?

Please Log in or Create an account to join the conversation.

Distributor 3 weeks 5 days ago #42013

I have just been offered an old distributor so I can modify and use this. I was wondering what happened to the engines with the dizzy on the end of the cam, most of these engines are in the USA I think. Thanks for the information

Please Log in or Create an account to join the conversation.

Distributor 3 weeks 4 days ago #42014

I got a blanking plug from Midwest Bayless
www.midwest-bayless.com/p-5872-4195150-u...-yugo-strada-u9.aspx

Please Log in or Create an account to join the conversation.

Distributor 3 weeks 4 days ago #42016

As I have an old dizzy on the way, I'll use this (after machining and lightening it of course!)
Thanks for the information.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.067 seconds