user_mobilelogo
Welcome, Guest
Username: Password: Remember me
This is a public forum thread open to all users
  • Page:
  • 1

TOPIC:

Heater pipe on engine 1 year 7 months ago #41839

Has anybody managed to source the 90 degree bend for the pick off for the heater as per the cut off part in the photo below?
Attachments:

Please Log in or Create an account to join the conversation.

Heater pipe on engine 1 year 7 months ago #41846

I've never seen new ones for sale. You can easily make one up out of silicone hose which comes in all sorts of sizes and bends, also in black to keep it looking more original

Please Log in or Create an account to join the conversation.

Heater pipe on engine 1 year 7 months ago #41848

Hi it was the metal pipe going into the cylinder head I was trying to source many thanks

Please Log in or Create an account to join the conversation.

Heater pipe on engine 1 year 7 months ago #41849

You could take the original to a hydraulic pipe fabricator to copy or get a piece of pipe the same outside diameter, thread it and form a bead on the end with pliers or something, the 90 degrees can be done with silicone pipes from viper performance.

Please Log in or Create an account to join the conversation.

Heater pipe on engine 1 year 7 months ago #41850

thanks David and thanks for the suggestion the great thing about the Forum is somebody has often been there and sourced something as i found with the black clips. I got a straight connector from demon tweeks but the thread was incorrect hence why i reached out to the group

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.079 seconds