TOPIC:

Abarth CD30 Cromodora- fitting problems 3 months 3 days ago #42266

Scott Slorach
Topic Author
Offline
Fresh Boarder
Posts: 2
Thank you received: 0

New wheels turning into a bit of a saga. Took off Cromodora 3 spokes from 1982 1500, and bought Abarth Cromodora CD30s which I was assured were homologated for X1/9. Had them fitted with same 165/70 R13 tyres taken off old wheels, and the tyre edge is clipping the plastic inside the wheel arch. Have seen posts on forums where others have fitted the same wheel/tyre combination and had no problems. Any ideas as to why and any solutions? All gratefully received!

Please Log in or Create an account to join the conversation.

Abarth CD30 Cromodora- fitting problems 3 months 3 days ago #42267

Michael Offline Gold Boarder Posts: 184 Thank you received: 19	They must be a different offset
	Please Log in or Create an account to join the conversation.

Abarth CD30 Cromodora- fitting problems 3 months 2 days ago #42268

Rob Warren Offline Moderator Posts: 664 Thank you received: 91	Try removing the standard spacer. 1986 'BAD' Turbo Bertone X1/9 1977 1300 Special Series 1989 Lotus Esprit 2.2 Turbo 1986 Mk1 b MR2 t-bar 1999 Mk 2 MR2 Rev 5 t-bar, 3.0 V6 vvti 2012 GT86
	Please Log in or Create an account to join the conversation.

Page:
1

Forum

Techie Talk

Restoration

Abarth CD30 Cromodora- fitting problems

Time to create page: 0.060 seconds