user_mobilelogo
Welcome, Guest
Username: Password: Remember me
This is a public forum thread open to all users
  • Page:
  • 1

TOPIC:

Indicator relay 3 months 2 weeks ago #42509

  • Pete
  • Pete's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 23
  • Thank you received: 0
Any idea why my indicators are very inconsistent but when using the hazards they are fine. Where can I get a replacement relay from located on the fuse box. Thanks

Please Log in or Create an account to join the conversation.

Indicator relay 3 months 2 weeks ago #42510

I can't explain the inconsistent flashing, but DG Rally has a new replacement relay on ebay: DG Rally X1/9 3 pin flasher relay]
The following user(s) said Thank You: Pete

Please Log in or Create an account to join the conversation.

Last edit: by Jeff Ward.

Indicator relay 3 months 2 weeks ago #42512

Have you checked all the wiring connections in the back of the fuse box to make sure they aren't corroded?
I cleaned mine a couple of years back and a lot of my electrics worked much better including the indicators.
Blue Gran Finale F100FAW
As seen in Classic & Sports car....
As seen in Auto Italia.....
As seen on Fifth Gear....!!!!
Lido ALF 704S

Please Log in or Create an account to join the conversation.

Indicator relay 3 months 2 weeks ago #42513

  • Pete
  • Pete's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 23
  • Thank you received: 0
Thanks all

Please Log in or Create an account to join the conversation.

Indicator relay 3 months 1 week ago #42519

And don't forget to clean the earth turrets, corrosion of the earths can be the source of all kinds of unexplainable electrical effects.

Please Log in or Create an account to join the conversation.

Indicator relay 3 months 1 week ago #42528

A common problem, probably caused poor earths and connections. Try a flasher unit for LED bulbs, needs far less current to operate. Worked for me
The following user(s) said Thank You: Alan Hutton

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.107 seconds